The AML STC, effective for most commercial aircraft types, allows for installation of the 500-32 series survival ELT in the cockpit or cabin.

The STC complies with the latest airworthiness requirements for installation of non-rechargeable lithium batteries per ETSO 142b.

Automatic Dependent Surveillance-Broadcast (ADS-B) is a system broadcasting, without the need for action from the pilot or any request from ATC, that provides an enhanced set of aircraft surveillance data to Air Traffic Management (and potentially to other airplanes)

Aptoz has developed the EASA and FAA AML STC effective for most aircraft types that allows for the installation of Collins Aerospace (Kidde) Halotron BrX handheld fire extinguishers in the cockpit and cabin. 

In recent years most countries have issued mandates requiring aircraft to be equipped with ADS-B Out equipment in order to fly in most controlled airspace. By the end of 2024 almost all mandates will have entered into force. 

This mandate is particularly problematic for ATR 42-300/-320, these aircraft  are factory-equipped with ADCs without the capability to transmit digital data and they are therefore incompatible with ADS-B transponders.

ADS-B is a surveillance technology that expands ATC Mode S functionalities by transmitting periodically GNSS position together with aircraft specific information such as Flight ID, Aircraft category, etc. This information is received by ATC or other aircraft and can be used to enhance airspace usage and improve situational awareness.

The use of automated external defibrillators (AED) is essential to increase the chances of survival in case of a cardiac arrythmias such as ventricular fibrillation (VF) and non-perfusing ventricular tachycardia (VT) when used in the first 10 minutes.

AMC1 CAT.IDE.A.220 (b) (4) stipulates that the aircraft operators should carry automated external defibrillator (AED) on board all aircraft equipped with a first-aid kit and required to carry at least one cabin crew.

Proponent provides a PAX-to-CARGO, re-usable solution in offering fire retardant CARGO SEAT COVERS to protect seats during the transport of all types of cargo.

Key characteristics:
- Seat Cover is made out of a Coated Fabric or Nylon
- Available in Black and Anthracite
- Re-usable solution
- Waterproof material
- Easy Installation, no special tooling
- Fire retardant per CS 25.853 (a)(1)(ii)

Available Standard Sizes:
4-Seater: 1990x1100x600 mm
3-Seater: 1600x1100x600 mm
2-Seater: 1020x1100x600 mm

The ULD upgrade consists of replacing the battery, in the existing (30 days) ULB, with a new Li Ion battery to support 90 days ULB operation. There is one ULB attached to the cocpit voice recorder and one ULB attached to the flight data recorder.

In anticipation of the EASA (EU) 2024/590 regulation mandating the replacement of halon extinguishers by 31 December 2025, PMV Engineering has secured a new STC covering ATR42 and ATR72 aircraft.

LED Sealed Beam Replacement Lamps from Talon

Get Light-Years ahead of your competition!

Talon Aerospace sealed beam replacement lamps are designed to allow for plug and play replacement of the existing sealed beam lamps fitted on an aircraft. Talon has 3 sizes available, with replacements for the Par 64 landing, Par 46 taxi and Par 36 logo, runway turn-off, engine and wing scan applications. The existing sealed beam lamps have a design life span between 25 and 300 hours while the Talon LED replacements are designed for 20,000 in service hours.

Light output is comparable to OEM lamps and the Par 64 landing light and Par 46 taxi light are designed to meet Mil Spec standard MIL-L-6503H. The LED replacements work with the existing transformers on the aircraft and are designed to minimize the overall LRU count within an operator inventory. The LED replacement lamps are designed with cool white LEDs to maximize light output but the Par 36 logo is also made available in warm white. Par 36 LED replacement lamps operate on both 13V and 26V AC, while the Par 46 and 64 operate on 26 VAC. All lamps can also operate on 28VDC, allowing for rotorcraft applications.

Talon LED sealed beam are designed at comparable weight to existing sealed beam lamps of equal size, allowing them to be used in existing fixtures. The current draw for the LED lamp is significantly lower compared to the existing units. Landing light Q4559X draws 650W while Talon LED replacement TAE0728-1 draws only 104W.

The LED replacement lamps are fully repairable and operator can replace individual components like the LED board, power supply and lens in case of failures, reducing cost of ownership.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.