Events related to aircraft missing over oceanic areas have led to several new requirements, amongst which is the introduction of a long-range Underwater Locator Device (ULD).

The ULD low frequency (8.8kHz) technology is used to increase the range at which aircraft submerged wreckage can be located.

It will be mounted on the aircraft structure free of sound absorbent materials and not in wing sections or empennage. The installation is in accordance with ARINC specification 667, which describes the removal, installation and maintenance aspects of an ULD installation.

Note that the ULD is not to be confused with the Underwater Locator Beacons (ULB) as installed on the CVR and FDRs. The ULD is complementary to the ULB and is mounted to the aircraft structure.

ICAO states that by January 1st 2018 aircrafts flying long range over water with a MTOW>27.000 kg must be equipped with an ULD. Long range over water is determined by the exceedance of the distance from a suitable emergency landing spot. The distance corresponds to 120 min at cruise speed or 400NM whichever is the lesser.

EASA states that by January 1st 2019 Passenger aircraft flying long range over water with a MTOW>27.000 kg and cargo aircraft with MTOW > 45.500kg must be equipped with an ULD. Long range over water is determined by a distance >180 NM from shore.

CARS 121 MOS 11.64 states that aircraft with a MTOW>27.000 kg carrying a life raft should have an ULD by December 2, 2023.

Other authorities have accepted similar rules.

Contact Fokker Services for other aircaft types.

Talon Aerospace LED logo light Assemblies to replace Halogen  replacement.

Do you recognize the following problems with your existing logo lights?

• Halogen bulbs are replaced frequently
• Lights are installed in difficult to reach areas and requires use of cherrypicker or lift
• Lens sealant does not have sufficient time to dry, leading to moisture ingress within horizontal stabilizer
• Transformer requires frequent replacement
• Incandescent bulb color temperature changes appearance of corporate logo

Get Light-Years ahead of your competition!

Talon Aerospace LED logo light assemblies are designed to allow for plug and play replacement for the existing HLX64621 halogen bulb based logo lights. Talon uses a rack to replace the OEM logo light housing. The LED module and transformer assembly are mounted to the rack. The OEM aircraft connector is mounted on the transformer assembly, making the LED logo light assembly plug and play.

The lens, lens gasket and hardware can be retained from the OEM unit, but Talon does make replacement lenses available for most applications. The Talon logo light assemblies operate on 115VAC 400Hz aircraft power. A transformer within the assembly steps the voltage down to 14V to power the LED module. All internal connectors are circular mil-spec connectors.

 Approved Model List:

 Planned for Approval:

• Embraer Embraer E170, Embraer E175, Embraer E190, Embraer E195

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products.
This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

LED Forward Navigation and Position Lights

Talon Aerospace LED Forward Navigation and Position Lights are designed to allow for plug and play replacement of the existing OEM LED and incandecsent lights fitted on A320, A330 and A340 series aircraft.

The LED Forward Navigation Lights are designed to remain on wing in excess of five years. During the first C Check after five years of operation the LED lights are removed to replace the LED board and gaskets for fresh service life.

The LED Forward Navigation Lights are fully repairable and come with a 5 year warranty.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers

with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

176 STCs on all Aircraft types from Boeing / Airbus / SAAB / Lockheed / Bombardier / Douglas / DHC / Hawker / Convair / McDonnell Douglas / 

Engineering Bulletin to introduce a single color external paint scheme which is typically used for export aircraft.

With 350 engineers, 45 years of expertise and a large DOA scope, ECM Sky Services assists Airlines in their modification projects with cost effective turnkey solutions. From minor changes to complete VIP cabin design, ECM is a key partner as soon as expertise and reactivity are mandatory.

A project, a request? Please contact us! 

Interface the aircrafts Iridium SATCOM system to the existing airbus FANS A+ system to facilitate the transfer of ATC data-link messages over the Iridium network.

The Gogo 2KU is Gogo's newest technology,providing in-flight broadband Internet service and other connectivity services for commercial and business aircraft. The technology uses two Ku-band antennas, one for download and the other for upload.

Installation of Aerocon Cabin Interior Noise Reduction System provides passengers a quiet cabin comfortable experience in your aircraft.

Aerocon takes a comprehensive approach to making cabin interiors quiet by providing fully
engineered & documented installation/modified kits. Each kit addresses a specific noise source or
area of the aircraft such as Insulation System Replacement/Modification, Air Distribution System
Modification, Interior Acoustic Treatments, and/or Special Treatments. Configured for easy installation
with clear, simple installation drawings, containing parts sized for easy handling, and utilizing tool-less
mechanical fasteners whenever possible.

Aircraft: A330-200

Installation of Aerocon On-Board Airstairs provide a VIP-class boarding experience without the need for ground support equipment.

Aircraft: Airbus A330-200