The use of automated external defibrillators (AED) is essential to increase the chances of survival in case of a cardiac arrythmias such as ventricular fibrillation (VF) and non-perfusing ventricular tachycardia (VT) when used in the first 10 minutes.

AMC1 CAT.IDE.A.220 (b) (4) stipulates that the aircraft operators should carry automated external defibrillator (AED) on board all aircraft equipped with a first-aid kit and required to carry at least one cabin crew.

Proponent provides a PAX-to-CARGO, re-usable solution in offering fire retardant CARGO SEAT COVERS to protect seats during the transport of all types of cargo.

Key characteristics:
- Seat Cover is made out of a Coated Fabric or Nylon
- Available in Black and Anthracite
- Re-usable solution
- Waterproof material
- Easy Installation, no special tooling
- Fire retardant per CS 25.853 (a)(1)(ii)

Available Standard Sizes:
4-Seater: 1990x1100x600 mm
3-Seater: 1600x1100x600 mm
2-Seater: 1020x1100x600 mm

Automatic External Defibrillators (AED) are becoming more and more commonly available in our daily life.

Recognized national health institutes in several countries currently advises these AED.

As a result of this, operators are requested by these health institutes to install this AED equipment on board of the aircraft.

Further AMC1 CAT.IDE.A.220 (b) (4) was issued with additional guidance, which is further detailed in FAQ n.19169, issued by EASA (https://www.easa.europa.eu/faq/19169)

Although the AED units are widely spread for civil use, DOA 160 certification for aerospace use is sometimes difficult to prove.

Fokker Services has successfully completed EMC verification testing on the Fokker 50 and Fokker 70/100 aircraft as well on a Embraer 170/190 and DeHavilland Dash-8 aircraft with the following commercially available model AED:

Philips Heartstart FRx 861304

www.medical.philips.com

Heartsine Samaritan PAD 350

www.heartsine.com

For over forty years, Ancra has principally designed, developed, tested, manufactured and supported mechanical lower deck Cargo Loading Systems for many types of aircraft. We deliver directly to the Airframe Original Equipment Manufacturers (OEM’s) as well as to passenger-to-freighter conversion providers in support of safely and efficiently moving pallets, ULD’s, specialty containers and more, on-board today’s various freighter aircraft.

Installation of an aft cargo bay avionics rack and shroud enclosure.

Installation of an Aft Cargo Bay Equipment Rack.

Cargo floorboard installation.

Installation of a doghouse (storage container) in the bulk cargo compartment. EASA.IM.A.S.02125 FAA STC ST03300AT-D

3D scanning and reverse engineering to support study, repairs, modifications and major conversion.

Analysis of cargo door design for compliance to the pressurizing prevention means requirements as specified in FAR 25.783 (c)(1