LED Sealed Beam Replacement Lamps from Talon

Get Light-Years ahead of your competition!

Talon Aerospace sealed beam replacement lamps are designed to allow for plug and play replacement of the existing sealed beam lamps fitted on an aircraft. Talon has 3 sizes available, with replacements for the Par 64 landing, Par 46 taxi and Par 36 logo, runway turn-off, engine and wing scan applications. The existing sealed beam lamps have a design life span between 25 and 300 hours while the Talon LED replacements are designed for 20,000 in service hours.

Light output is comparable to OEM lamps and the Par 64 landing light and Par 46 taxi light are designed to meet Mil Spec standard MIL-L-6503H. The LED replacements work with the existing transformers on the aircraft and are designed to minimize the overall LRU count within an operator inventory. The LED replacement lamps are designed with cool white LEDs to maximize light output but the Par 36 logo is also made available in warm white. Par 36 LED replacement lamps operate on both 13V and 26V AC, while the Par 46 and 64 operate on 26 VAC. All lamps can also operate on 28VDC, allowing for rotorcraft applications.

Talon LED sealed beam are designed at comparable weight to existing sealed beam lamps of equal size, allowing them to be used in existing fixtures. The current draw for the LED lamp is significantly lower compared to the existing units. Landing light Q4559X draws 650W while Talon LED replacement TAE0728-1 draws only 104W.

The LED replacement lamps are fully repairable and operator can replace individual components like the LED board, power supply and lens in case of failures, reducing cost of ownership.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

Dual transponder system ADS-B upgrade in Part 25 aircraft

Installation of an AlliedSignal Mark VII Ground Proximity Warning System or AlliedSignal Mark VII Enhanced Ground Proximity Warning System.

Installation of AlliedSignal CAS-67A Traffic Alert and Collision Avoidance System (TCAS II) with MOPS 6.04A or MOPS 7.

Installation of a Bendix/King CAS 67A TCAS II System with Dual Bendix/King MST-67A Mode S Transponders Certification Basis Limitations -FAA STC ST451CH-D-Garrett Aviation Services Drawing List DL38102 no revision dated January 19 1995 or later approved revision-1/AFM Supplement dated February 14 1995 no revsion or later approved revision- 2/AFM Supplement document 53-8783-001 no re (...) Conditions 1. This STC is approved only for the product configuration as defined in the approved design data referred to in the paragraph Description". Compatibility with other aircraft/engine configurations shall be determined by the installer.

Installation of an AlliedSignal Avionics MK-VII, Enhanced Ground Proximity Warning System Certification Basis Limitations -FAA STC ST451CH-D-Garrett Aviation Services drawing list DL541 revision B dated August 12 1998 or later approved revision- 1/AFM Supplement dated August 21 1998 or later aproved revision-2/AFM Supplement AFMS202 dated January 23 1999 or AFMS204 da (...) Conditions 1. This STC is approved only for the product configuration as defined in the approved design data referred to in the paragraph Description". Compatibility with other aircraft/engine configurations shall be determined by the installer.

Installation of a Dual AlliedSignal GNS-XLS flight management system.

Installation of the AlliedSignal CAS 67A TCAS II System Certification Basis Limitations Duncan Aviation, Inc., Document List No 10047000, Revision A, dated May 20 1996Duncan Aviaiton, Inc., Document List No 40160000, FAA approved Airplane Flight Manual Supplement, dated May 31, 1996 Revision A, dated May 20, 1996orDocument No40165900, (...) Conditions This STC is approved only for the product configuration as defined in the approved design data referred to in the paragraph Description". Compatibility with other aircraft/engineconfigurations shall be determined by the installer.

Installation of an AlliedSignal Enhanced Ground Proximity Warning System(EGPWS) Certification Basis The Certification Basis for the original product remains applicable tothis certificate/ approvalThe certificated noise and/ or emissions levels of the original productare unchanged and remain applicable to this certificate/ approval Limitations FAA STC ST00703WIDocument List 10051900 Revision K from 12 June 1998Airplane Flight Manual Supplement (AFMS) 40189700 Revision D from 16Sept. 1998Instructions for Continued Airworthiness (ICA) 44500400 from 12 June1998or later revisions ofthe above (...) Conditions According to associated technical documentation, FAA STC, AFMS and ICA

Installation of ARTEX Emergency Locator Transmitter (ELT) 110-406.