LED Sealed Beam Replacement Lamps from Talon
Get Light-Years ahead of your competition!
Talon Aerospace sealed beam replacement lamps are designed to allow for plug and play replacement of the existing sealed beam lamps fitted on an aircraft. Talon has 3 sizes available, with replacements for the Par 64 landing, Par 46 taxi and Par 36 logo, runway turn-off, engine and wing scan applications. The existing sealed beam lamps have a design life span between 25 and 300 hours while the Talon LED replacements are designed for 20,000 in service hours.
Light output is comparable to OEM lamps and the Par 64 landing light and Par 46 taxi light are designed to meet Mil Spec standard MIL-L-6503H. The LED replacements work with the existing transformers on the aircraft and are designed to minimize the overall LRU count within an operator inventory. The LED replacement lamps are designed with cool white LEDs to maximize light output but the Par 36 logo is also made available in warm white. Par 36 LED replacement lamps operate on both 13V and 26V AC, while the Par 46 and 64 operate on 26 VAC. All lamps can also operate on 28VDC, allowing for rotorcraft applications.
Talon LED sealed beam are designed at comparable weight to existing sealed beam lamps of equal size, allowing them to be used in existing fixtures. The current draw for the LED lamp is significantly lower compared to the existing units. Landing light Q4559X draws 650W while Talon LED replacement TAE0728-1 draws only 104W.
The LED replacement lamps are fully repairable and operator can replace individual components like the LED board, power supply and lens in case of failures, reducing cost of ownership.
Talon and Proponent
Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.
Proponent
Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.
Dual transponder system ADS-B upgrade in Part 25 aircraft
Description of Change:
The change consists of a replacement/upgrade of the existing transponder/s (Single or dual) to include ADS-B functionality according Minimum Operational Performace Standards (DO-260B MOPS). To comply with the ADS-B (DO-260V) requirements (per CS-ACNS) the unit should hold an EASA equipment authorisation in accordance with ETSO-C166b and ETSO-C112d.
In addition the CS-ACNS requests an ADS-B Fail annunciation. Additional ADS-B Fail annunciator will be installed in instrument panel.
The STC 10059536 involves the following Types of Aircraft
ADS-B out Replacement / Upgrade of the existing single or dual transponder to include ADS-B functionality according to Minimum Operational Performance Standards.
Design Change to install a combined GPS, VHF Navigation and VHF Communication System on the Cessna Citation 500/550 series aircraft.
Installation of a Rockwell Collins IDS-3000 Integrated Display System in accordance with Garrett Aviation Services Drawing List #1003286, Revision B, dated May 10, 2005 or later FAA approved revision.
Certification of Reduced Vertical Separation Minimum (RVSM) operational capability.
Certification of Reduced Vertical Separation Minimum (RVSM) operational capability.
Installation of an Innovative Solutions & Support Air Data Computer.
Installation of a J2/Kollsman Air Data System.