The use of automated external defibrillators (AED) is essential to increase the chances of survival in case of a cardiac arrythmias such as ventricular fibrillation (VF) and non-perfusing ventricular tachycardia (VT) when used in the first 10 minutes.

AMC1 CAT.IDE.A.220 (b) (4) stipulates that the aircraft operators should carry automated external defibrillator (AED) on board all aircraft equipped with a first-aid kit and required to carry at least one cabin crew.

Prepared for portable IFE installation or any emergency equipement ?

Keeping the max overhead bin space for the use of passenger is a challenge on every aircraft. 

To optimize such precious space and to secure the IFE box, PMV Engineering has certified a easy-to-install, cost effective bin divider with its restraint system.

AED installation (includin ETSO C142A non-rechargeable lithium batteries).

As part of lease return, phase-out, or aircraft transition processes, removal or reversal of previously installed STCs is often required. These could include obsolete systems, lessee-specific modifications, or customer-tailored configurations no longer applicable for the next operator.

Fokker Services provides certified engineering support for the full demodification process, ensuring compliance, traceability, and airworthiness restoration aligned with the requirements of the new lessee or owner.

Whether it’s a minor seat row adjustment or a complete VIP interior configuration, Fokker Services provides flexible, certified LOPA engineering support to match your operational and regulatory needs.

Our services are ideal for aircraft transitions, reconfigurations, or completions, ranging from simple cabin layout changes to high-end executive interiors. We support airlines, lessors, MROs, and VIP operators with tailored layout solutions backed by EASA DOA approval.

Introduction of Sandel ST3400H HTAWS and SG102/D AHRSRev.1:Addition of S-61N serial number 61809

Installation of passenger cabin interior

Installation of a Cabin air exhaust muffler, to reduce this noise to a more comfortable level by installing a valve cap and sound damping system

Installation of Parker Hannifin Corporation, Aircraft Wheel& BrakeDivision Conversion Kit 199-110, revision AB, dated June 18, 2010, andif applicable, installation of Parker Hannifin Corporation, AircraftWheel & Brake Division Hot Air Manifold Kit 199-168, revision F, datedJune 18, 2010.Rev. 1: Tra...