Automatic Dependent Surveillance-Broadcast (ADS-B) is a system broadcasting, without the need for action from the pilot or any request from ATC, that provides an enhanced set of aircraft surveillance data to Air Traffic Management (and potentially to other airplanes)

The aircraft will be provided with PM-CPDLC capability by replacing the currently installed Honeywell MK III Communications Management Unit (CMU) with the new Honeywell MK II+ CMU and installing a VHF Data Radio (VDR) which is VHF Data Link Mode 2 (VDL2) capable.

The FMS Software will be updated from NZ 6.1 (currently installed on the aircraft) to NZ 6.1.1, which contains the FANS message latency timer required for PBCS (Performance Based Communication and Surveillance) compliance.

Proponent provides a PAX-to-CARGO, re-usable solution in offering fire retardant CARGO SEAT COVERS to protect seats during the transport of all types of cargo.

Key characteristics:
- Seat Cover is made out of a Coated Fabric or Nylon
- Available in Black and Anthracite
- Re-usable solution
- Waterproof material
- Easy Installation, no special tooling
- Fire retardant per CS 25.853 (a)(1)(ii)

Available Standard Sizes:
4-Seater: 1990x1100x600 mm
3-Seater: 1600x1100x600 mm
2-Seater: 1020x1100x600 mm

The ULD upgrade consists of replacing the battery, in the existing (30 days) ULB, with a new Li Ion battery to support 90 days ULB operation. There is one ULB attached to the cocpit voice recorder and one ULB attached to the flight data recorder.

LED Sealed Beam Replacement Lamps from Talon

Get Light-Years ahead of your competition!

Talon Aerospace sealed beam replacement lamps are designed to allow for plug and play replacement of the existing sealed beam lamps fitted on an aircraft. Talon has 3 sizes available, with replacements for the Par 64 landing, Par 46 taxi and Par 36 logo, runway turn-off, engine and wing scan applications. The existing sealed beam lamps have a design life span between 25 and 300 hours while the Talon LED replacements are designed for 20,000 in service hours.

Light output is comparable to OEM lamps and the Par 64 landing light and Par 46 taxi light are designed to meet Mil Spec standard MIL-L-6503H. The LED replacements work with the existing transformers on the aircraft and are designed to minimize the overall LRU count within an operator inventory. The LED replacement lamps are designed with cool white LEDs to maximize light output but the Par 36 logo is also made available in warm white. Par 36 LED replacement lamps operate on both 13V and 26V AC, while the Par 46 and 64 operate on 26 VAC. All lamps can also operate on 28VDC, allowing for rotorcraft applications.

Talon LED sealed beam are designed at comparable weight to existing sealed beam lamps of equal size, allowing them to be used in existing fixtures. The current draw for the LED lamp is significantly lower compared to the existing units. Landing light Q4559X draws 650W while Talon LED replacement TAE0728-1 draws only 104W.

The LED replacement lamps are fully repairable and operator can replace individual components like the LED board, power supply and lens in case of failures, reducing cost of ownership.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

WIFI AIR TV is an easy to install solution, offering passengers In Flight Entertainment and Connectivity on board.

Passengers will be able to upload any program or movie from a catalogue using WIFI Technologies’ WIFI Cabin Network. Applications self-upload under Windows, iOS or Android on their computers, tablets and smartphones. News and events information are updated automatically in 3G/4G before take-off.

328 Design GmbH (328DO), part of the 328 Group has been awarded a contract from ALAMO Engineering GmbH to upgrade the EMBRAER 135 jet variants including the Legacy 600 and 650 aircraft family with the latest Honeywell DU-875 ELITE Cockpit Displays.

Work will be carried out under a form and fit and function replacement strategy.

To download the PDF brochure for more information, please click on "Front Sheet" above

Honeywell’s Primus Display DU-870 which uses cathode ray tube (CRT technology) will be replaced by the latest generation Honeywell DU-875 ELITE displays, which introduces state-of-the-art LCD technology for Embraer Legacy 600/650 operators.  

It is the most sophisticated and user friendly display available on the retrofit market today, featuring powerful graphics, advanced functionality and the improved clarity of Liquid Crystal Display (LCD) technology.

Dual transponder system ADS-B upgrade in Part 25 aircraft

Interior Reconfiguration Serial No 7644

Installation of a Cabin Interior