Introduction of Rockwell Collins Dual ADF-60 System
Overview
Introduction
Installation of a Rockwell Collins Dual ADF-60A Automatic Direction Finding System (ADF) onto a Fokker F27-200 aircraft
Your needs
- Remote mount ADF receiver
- Typically used with ANT-60A/B combined sense/loop antennas, either 614L-11/12/13 analogue controls or CTL-60, CTL-62 (w/ CAD-62) digital controls, and RMI-30 indicators as a system
- Completely solid-state, no rotating machinery
- Coherent detection to demodulate bearing signal for reduced bearing errors and safety hazards caused by adjacent channel signals
- Automatic band switching for ease of frequency selection over entire operating range
- Audio muting and pointer stowage with unusable signal
- Digital tuning combined with single crystal frequency synthesizer
- Digitally stabilized frequency synthesizer
- Crystal filter selectivity
Your benefits
- Low or medium frequencies are not affected by line-of-sight
- Signals follow curvature of the earth therefore if the aircraft is in line with the station, signals can be received, regardless of altitude
Product Description
Please contact modification supplier for further details.
STC Status: Revision Level: n/a
STC Date: 20-6-2007
Responsible Office:
FOKKER F.27 MARK 050
FOKKER F.27 MARK 0502
FOKKER F.27 MARK 0604
FOKKER F.27 MARK 100
FOKKER F.27 MARK 200
FOKKER F.27 MARK 300
FOKKER F.27 MARK 400
FOKKER F.27 MARK 500
FOKKER F.27 MARK 600
FOKKER F.27 MARK 700
Your benefits
- Low or medium frequencies are not affected by line-of-sight
- Signals follow curvature of the earth therefore if the aircraft is in line with the station, signals can be received, regardless of altitude