Install Aero Medical Products Mfg., Inc. Air Ambulance Stretcher P/N 125 using Installation Kit P/N 800 in accordance with Installation and Operating Instructions, Form EA 109K, dated April 23, 2001, or later FAA approved revisions. The Medical Oxygen System Kit P/N 807 is an FAA approved option. The Inverter/Pump Kit No. 812 may be installed in accordance with Inverter/Pump Installation Instructions, EA Form 170, dated June 9, 2001, or later FAA approved revisions.

Installation of structural fittings in the wing as provisions to accommodate future external stores in accordance with Sierra Nevada Corporation Drawing List, Report No MDL-0142-25-9316, Revision A, dated February 15, 2011, FAA approved March 29, 2011, or later FAA approved revision.

Installation of C&D Associates Combustion Heater Kit 18 P/N CD14046K18, in accordance with C&D Associates heater Installation Instructions IN14046K18, Rev. none, dated February 3, 2005 or later FAA approved revision.

Interior installation of, operator seats, equipment racks, power distribution panel, signal junction boxes, inoperative cockpit video display, cabin Inter-Communication System (ICS), ballast boxes and provisions to mount antennas, and baggage compartment installation of, power inverters, alternating current/direct current junction boxes, and a lead-acid mission battery in accordance with Sierra Nevada Corporation Drawing List, Report No. MDL- 0142-25-9309 Revision A, dated June 15, 2011, FAA approved July 25, 2011, or later FAA approved revision.

Installation of C&D Associates Combustion Heater Kit 17 P/N CD14045K17, in accordance with C&D Associates heater Installation Instructions IN14045K17, Rev. none, dated February 3, 2005 or later FAA approved revision.

Installation of Nose Boom Provisions, Pylons and Antennas

Replace the o-ring seals in the landing gear lower strut seal.

Replace standard wing tip assembly with winglet tip assembly.

Fiberglass wing tips.

Support and opening in bottom of fuselage for Aeropath camera.