Carlisle Interconnect Technologies, in a partnership with Saint Gobain Performance Plastics, now offers a complete ARINC 791 solution for Ka- and Ku-band SATCOM installations. The complete package contains everything required for either retrofit or forward fit installations on large jet aircraft. Installation fittings are adjustable to cover the complete range of aircraft frame spacing while providing discrete interface loads to the fuselage. The aerodynamic fairing follows the fuselage curvature without requiring a large installation doubler, sealants, or fasteners through the aircraft skin.
As a result of passengers bringing their own PED's, there is an increased need to charge these PED's.
Fokker Services has introduced an in-seat power supply system that will allow the passenger to charge their PED's, based on the universally used USB standard with max 2.1 amps. We can support different aircraft types.
As USB-C is now becoming the standard Fokker Services can also provide an USB-C 60 watt per seat solution.
Further Fokker Servcies may also provide an upgrade kit were the USB-A outlet port is replaced by a drop-in replacement USB-C port, while maintaining the rest of the original system. This make it a very cost effective solution.
Installation of 1000 Series photo luminescent floor path marking
Installation of new Premium Economy Class in the main cabin of the main floor
Installation of non-electrical Floor Path Marking SystemRev. 1: Extends applicable pre-change configurations to includenon-electrical or electrical floor path marking systems
Installation of Data Broadband Transceiver System with fullprovisionfor On-Board Mobile Telephony SystemRev. 1 - Instructions for Continued Airworthiness revision due to themodification of an existing inspection task interval and itsintroduction into ALS section.
Installation of Data Broadband Transceiver System with full provisions for On-Board Mobile Telephony System